Wall to Wall Cable With Tensioner

• Cable display wall to wall fitting. Made of Brass & polished chrome finish.
• Comes with 3 meter long cable tensioner and 2 wall to wall fittings. (Cable can cut to size)
• This steel wire rope set includes cable tensioners to make cable tight between top wall mounted fixing & bottom wall mounted fixing.  

Easy to install:

• First, unscrew the 'Cable Tensioner' into two separate pieces. Each piece should have its own length of cable attached!
• Next, unscrew a Wall Fitting into two components (one 'Wall Mount' and one 'Chrome Cover'). Attach the 'Wall Mount' to the wall where you intend for the top of your display to be; then, reattach the 'Chrome Cover' ensuring that its 'cable hole' is oriented downwards, with the 'Grub Screw' positioned on the side!
• Proceed to repeat this process with the second Wall Fitting, but this time, measure, align, and install the 'Wall Mount' at the location designated for the bottom of your display. After securing it to the wall, add the 'Chrome Cover' and ensure that the 'cable hole' is facing upwards, with the 'Grub Screw' on the side!
• Now, take the piece of 'Cable Tensioner' that has the longer cable length and thread it through the 'cable hole' of the top Wall Fitting, then tighten the 'Grub Screw' on the Chrome Cover.
• Next, take the other piece of the 'Cable Tensioner' and partially reassemble it. Thread the cable through the bottom Fitting and tighten the 'Grub Screw'.
• At this point, you can further tighten the 'Cable Tensioner' to ensure the cable is taut! The spring within the tensioner will help maintain cable tightness over time, accommodating changes in temperature and other factors. Any excess cable can be trimmed for a tidy finish!