Suspended White Wooden Shelf (Ceiling to Floor) Cable Display Kit

• White wooden shelves have a unique charm and a looks fantastic in any space.
• High quality shelves made of MFC (melamine coated chipboard). This is currently being tested with 30 kg of weight. (These have a large diameter of 18 mm)
• With the white fittings you can get white ceiling to floor with white steel cable and white under shelf support.
• With the steel fittings you can get silver ceiling to floor with steel cable and silver under shelf support.
• Different sizes of shelfs are available. 

Include:

• White Wooden Shelf (1 to 4, Chosen Size)
• 4 x 4m long cable Ceiling-to-Floor fixings (White or Steel cable) (Cable can cut to size)
• 4 x Under-Shelf Supports (4 Supports per shelf)
• All screws and wall plugs,  Allen Keys, are included (Complete installation).

Note: Under-Shelf Supports enable a single shelf board to carry up to 20kg.

How to Install Ceiling to Floor:

• Un tight ceiling part it will split in to 2 pieces. Similarly un tight floor part it will also split in to 2 pieces.
• Screw male part in to the ceiling and tight female part.
• Suspend cable from ceiling part & pass through from the hole into the wooden shelf and tighten the under shelf screw then Shelf does not slide down.
• Cable will pass through from all shelves and under each shelf there are under shelf supports to hold the shelf from falling down.
• Lastly screw the bottom part of floor fitting into the floor and top part tight in it. Spring inside the top part of floor fixing give tension to the cable and make the cable straight & tight.