Wall to Floor Cable

• Cable Display Wall to Floor Fixing With 4meter steel cable. (Cable can cut to size)
• Available in satin chrome and polish chrome finish.

How to Install:

• Unscrew the Wall Fitting into two components (1 'Wall Mount' and 1 'Chrome Cover'), and attach the 'Wall Mount' to the wall at the top of your display; subsequently, reattach the 'Chrome Cover' ensuring that its 'cable hole' is oriented downwards, with the 'Grub Screw' positioned on the side!
  
• Next, separate the Floor Fitting into two parts (1 'Floor Mount' and 1 'Chrome Floor Cover' equipped with Spring & Cable').
  
• With the cable now hanging straight, you may proceed to mark and install the 'Floor Mount' at the appropriate location on the floor. Following this, partially secure the 'Chrome Floor Cover' with the cable properly attached back onto the 'Floor Mount'.
  
• If the cable remains loose while the 'Chrome Floor Cover' is partially secured, loosen the 'Grub Screw' located on the side of the Wall Fitting's 'Chrome Cover', and draw more cable through it. Once the cable is taut, tighten the 'Grub Screw' and secure the 'Chrome Floor Cover' until the cable is tight!It is imperative that the cable is taut before the 'Chrome Floor Cover' is fully fastened onto the 'Floor Mount' to ensure the Tension 'Spring' functions effectively! Any excess cable can be trimmed for a tidy finish. DO NOT cut any cable until you are completely confident that the system has been installed correctly!